Motorsport Track Art  -Oulton Park Island

Motorsport Track Art -Oulton Park Island

Oulton Park Circuit is a motor racing track close to the village of Little Budworth, Cheshire, England. It is about 5 miles (8 km) from Winsford, 13 miles (21 km) from Chester city centre, 8 miles (13 km) from Northwich and 17 miles (27 km) from Warrington, with a nearby rail connection along the Mid-Cheshire Line. It occupies much of the area which was previously known as the Oulton Estate. The racing circuit is owned and operated by Jonathan Palmer's MotorSport Vision organisation.

 

The track is characterised by rapidly changing gradients, blind crests and several tight corners. The full circuit is 2.8 mi (4.5 km). The highest part of the course is Hill Top. Paddock facilities are reasonable in size with large areas of hard-standing and some power points.

The race track can be adapted for shorter courses. The "Foster's" Circuit, which is 1.66 miles (2.7 km), comprises half of the "Cascades" corner followed by the "Hislop's" chicane, it then heads onto Knickerbrook and up the 13% gradient of Clay Hill to work its way round to the start/finish straight. The British Touring Car Championships uses all of the Cascades Corner and Lakeside but then forks off into a hairpin before Island Bend. This hairpin cuts out all of the Island section of the circuit and takes the cars straight back over Hill Top.

Beginning in 2007, all the circuit's marshalling stations were redesigned with protective cages. This was to prevent incidents similar to those seen in the 2006 season when cars had collided with marshalling posts. A cage-protected marshals station was also built at the bottom of the back straight near the chicane preceding Knickerbrook.

 

Our Track Art are supplied laser cut from 3mm Genuine Perpsex which has a 10 year guarantee against cracking or distortion through sun light and UV Rays. 

 

With a choice of two fixings, you decide whether your Track Art is supplied with chrome stand off brackets (x2 although some tracks have additional). The installation is to simply mark your wall, attach the chrome backing (screws and rawl plug not included) and screw the chrome cap on, trapping the Track Art between. 

Or supplied with no mounting holes and supplied with 3M double sided adhesive blocks which require sticking on the back and trimming to size with scissors or a knife. 

 

Our Track Art is cut from Black Perspex which measures 290m wide by 190mm tall. The actual Track Art will be scaled to best fit these measurements but will not be compacted so as to maintain the original scale. 

 

All our tracks have the race track name and direction of travel engraved on the start / finish straight but you may decide to personalise it as you choose. 

    PriceFrom £16.00